Welcome to EarlK Design!


The EarlK Design blog consists mainly of entries that show how to do things using Adobe Photoshop that I hope you will find helpful and give your creative mind more tools to work with.

I use Adobe Photoshop CS6, and sometimes Adobe Illustrator CS5, Lightroom 5, and Corel Painter X. However, I believe that much of what I show can be done using Photoshop Elements.



Tuesday, September 25, 2012

Partings.....Texture Tuesday with Kim Klassen 25 September 2012

Here is another episode of Texture Tuesday with Kim Klassen.

Kim's guideline for us this week was short. It was

I'd love to see an image textured with the latest freebie Partings.

I thought a while about what image I could use for this. Since the name of the texture we need to use is Partings, I thought about using an image of a parting. So I used this image of my sister and our grandfather.



Before I was born, my grandfather used to take my sister into downtown Los Angeles, California, for outings. Frequently they would go to a photographer's studio and have a picture taken. In 1923 our grandfather and my sister had their picture taken on a studio train setup as if they were departing on a train trip. I always thought, when I saw this photo, that our grandfather was just about to say to my sister, "Wave goodbye."


Step 1.  I didn't want to use the texture on just the photo. I decided to make a 12 x 12-inch page layout with the photo on it and the use the texture on the layout. I opened in Photoshop CS5 a new document that was 12 x 12-inch, 300 ppi, RGB, white background.



I created these images that I am showing here after I was though making the layout. You see my total Layers Panel. You can see which layers are visible by the eyeball in the front of the layer. This image shows that only the background layer is visible. This is how the layers are at the end, but not necessarily the order in which the layers were created. So follow me in these steps as to how this all was done.

Step 2.  I brought my photo into the layout and held down the Shift Key so that the photo was centered on the page. You can see that the eyeball in front of the photo layer is now on.


Step 3. Next I thought that I would use one of my textures for the background of the layout. I used my texture EKD_blend-10. This texture has some faint lines in it that are sort of like the lines in the photo of the guard rails my sister is sitting on and windows. I brought it in as a layer just above the Background Layer. I turned the visibility of the photo layer off, by clicking on its eyeball, so you can see the texture. This is it at Normal Mode and Opacity 100%.


Then I turned the visibility of the photo back on.



Step 4.  Now for a little color for the layout, I brought in a decorative flower that I had made. I put the flower on a layer that was below the photo and above my texture layer. As I brought it in, I held down the Shift Key so that it was centered on the page. This puts it centered under the photo since the photo was also centered on the page.



Step 5.  For the next layer I brought in Kim Klassen's texture kk_partings as a layer above the photo layer. This is kk_partings at Normal Mode and Opacity 100%.


I changed the layer Blend Mode to Lighter Color and Opacity 50%.



The addition of kk_partings with the mode and opacity change muted the too bright colors of my flower, added in a nice edge treatment to the page, and changed the overall color of the background to blend nicely with the sepia color of the photo. However, I did not want the texture over the photo.

Step 6.  To eliminate the texture over the image. I duplicated the kk_partings layer onto its own layer above the current texture later by using Command / Control - J to jump a copy to its own layer. I made this copy in case I wanted to have the whole texture still available if I wanted to use it again in the layout. While the duplicate kk_partings layer is the active layer, I held down the Command / Control key and clicked on the thumbnail of the photo layer. This put the marching ants selection about the photo area, but the selection is on the kk_partings duplicate layer since it is the active layer. I deleted that area from that selection of the marching ants by hitting Delete / Backspace.



It doesn't look like it is gone because the layer below it is still on, so turn its visibility off.




Step 7.  I decided that I wanted a mat under my photo. I made my photo layer the active layer. I held down the Command / Control key and clicked on the thumbnail of the photo layer to put a selection about the photo area.


I now wanted to increase the size of the selection to make it the size for a mat under the photo.




If I were to use the Select / Modify / Expand, this would allow me to expand the selection, but it would now have rounded corners. I want square corners instead of round so that they match the photo corners.


So instead, I use Select / Transform Selection.



And, this puts the transform handles on the selection and I can grab one of the corner handles while holding down the Shift and Option keys drag out the selection to the size I want for the mat.



Step 8. Since I want the mat under the photo, I held down the Command / Control key while clicking on the Create New Layer button at the bottom of the layers panel. This creates a new layer under the active layer. The new layer is now below the photo layer and is the active layer. The selection will be on this active layer. I clicked on the Foreground Color in the Tool Panel to open the Color Picker. I sampled a color from the background of the layout. Then I filled the selection with that color. I used Option / Alt - Delete / Backspace to fill the selection. And I now have my mat under the photo.




Step 9.  Next I put in my title for the layout. Using the Horizontal Type Tool, I used the font 
Myriad Pro Bold. I had reset the tool by right clicking on the Tool Preset picker in the Options Bar and selected Reset Tool. So the font was at its default settings. I increased the size to what I wanted and used all caps. I used this font since it sort of mimicked the letters on the sign on the train in the image.



However, the default setting for the font has the letters too far apart. The letters on the sign are very close together. What I need to do is adjust the spacing between each of the letter pairs. This is called kerning. You can do this in the Character Panel. But, I find it is easier for me to do it from the keyboard. I make sure my text layer is the active layer. and I double clicked on the T thumbnail for the layer to select the text. The text is now highlighted. Using the Horizontal Type Tool, place the cursor between the two letters that you want to adjust the spacing by clicking between the two letters. If you want the letters closer together, hold down the Option / Alt key and press the left arrow key. Do this as many times as you need to get them as close as you want. If you want the letters father apart, hold down the Option / Alt key and press the right arrow key. This what I did to get my spacing for my title.


Step 10.  Next I double clicked to the right of the title layer name to open up the Layer Style dialog. I clicked on the name Bevel and Emboss, not the check box, to open the Bevel and Emboss dialog. I gave my letters a little bevel and emboss as shown.


Then I clicked on the words Blending Options: Custom at the top of the left side to open the Blending Options dialog. In the Advanced Blending section, I reduced the Fill Opacity to 50%. This reduces the Fill Opacity to 50% so you can see through the color of the text, but it leaves the bevel and emboss as is. If you were to reduce the layer opacity instead, the bevel and emboss would also be reduced.




Now I have my letters closer together and with a bevel and emboss and you can see through the letters.




Step 11.  Now I put in my Subtitle and journaling. I used the same font as the title, Myriad Pro so that I had consistency within my type for the layout. However, to have some contrast, I used Myriad Bro Bold italic for the subtitle and made it larger that the journaling. For the journaling, I used Myriad Pro bold.




Step 12.  I want to burn in, darken, the edges of the layout so as to focus the eyes into the inside of the layout. I'll do this in a way that gives me a lot of flexibility. I want a new layer at the top of the Layers Panel. With the current top layer active, I held down the Option / Alt key and clicked on the Create a New Layer button at the bottom of the Layers Panel. This opens the New Layer dialog. I named the layer edge burn. I set the Mode to Soft Light. Opacity is 100%. And I checked the box to Fill with Soft-Light-neutral color (50% gray). Then clicked OK.



This puts the neutral 50% gray layer at the top of my layer stack. You don't notice any difference in the image since the 50% neutral gray doesn't change anything below it. 




However, now I can use the Brush Tool to paint over the edges to darken the edges. If I wanted more flexibility, I could now create a new layer over this layer and paint with a black brush to darken areas. If I also wanted to lighten some areas, I could create a new layer above the black layer and paint with white on that layer to lighten areas. You can vary the opacity of the brush layer to adjust how much darker or lighter you want it to be. Since I just want to darken the edges of the layout, I will paint with black using a soft brush. In the Brush Options Bar, I set the brush opacity to 30%. Then on the 50% gray layer I clicked over one of the corners; then, holding the Shift Key down, I clicked on the next corner. This constrains the brush to a straight line between the corners and as long as  keep holding the Shift Key down it will be considered as one stroke of the brush so that it all is at 30% opacity as I click from one corner to the next around the square to the beginning. If you want it darker, you could release the Shift Key, click on a corner, hold the Shift Key down, click on the next corner, etc. I just went around once at 30% to darken my edges as shown here.




I was pleased with this result. My final Layout looks like this now.



I hope you enjoyed seeing how I did this. There are several helpful tidbits that I show along the way. I hope you can use some of them in your scrapbooking.


That's all for now. This was a long one.


Live life to the fullest.


Earl

12 comments:

Nancy Claeys said...

Great tutorial and I love the result Earl. Visiting from Texture Tuesday. :)

CATHY said...

A beautiful image and such a sweet memory.

bailey-road.com said...

Beautiful work.

Carola Bartz said...

This is a double partings! Great work, thank you for the tutorial. I like the result very much.

PrairieJill said...

Lovely page!

Currie Silver said...

wow, Earl!! this is amazing. I'll admit I got a bit overwhelmed as this whole business of Photoshop is still really NEW to me, but what a generous post!! I know I learned a LOT and I skipped through much of it, so know I will BE BACK to see this again.

what a great story, too. it just made me think of so many stories that we are told or that we simply make up of the TIME BEfore we are HERE.

thank you so much!!

Ahayes1225 said...

Wonderful tutorial!

ninest123 said...

ninest123 16.01
true religion jeans, air max pas cher, longchamp, timberland, nike air max, converse pas cher, nike blazer, michael kors uk, vans pas cher, north face, sac guess, sac burberry, nike air force, ray ban sunglasses, polo ralph lauren, hollister, north face, true religion outlet, coach outlet store online, michael kors outlet, louboutin, lululemon outlet online, ralph lauren, abercrombie and fitch, true religion outlet, michael kors, true religion jeans, nike huaraches, air max, nike free, longchamp, oakley pas cher, michael kors pas cher, hollister, new balance pas cher, sac hermes, air jordan, nike roshe run pas cher, mulberry, hogan outlet, ray ban pas cher, replica handbags, nike tn, nike roshe, vanessa bruno, nike free pas cher, nike trainers, air max, sac longchamp pas cher, coach purses, polo lacoste

ninest123 said...

tory burch outlet, jordan shoes, oakley sunglasses, michael kors outlet, oakley sunglasses, michael kors outlet, chanel handbags, longchamp outlet, uggs outlet, ugg boots clearance, burberry outlet, tiffany and co, nike shoes, michael kors outlet online sale, louis vuitton, cheap uggs, prada outlet, oakley sunglasses, polo ralph lauren outlet, louis vuitton handbags, michael kors outlet, replica watches, ray ban sunglasses, nike free, ugg outlet, louboutin outlet, ray ban sunglasses, louis vuitton outlet, oakley sunglasses cheap, cheap oakley sunglasses, air max, tiffany and co, louis vuitton outlet, ray ban sunglasses, louboutin shoes, longchamp handbags, burberry outlet, longchamp handbags, prada handbags, louis vuitton outlet stores, air max, uggs, michael kors outlet, polo ralph lauren, michael kors outlet, louboutin, rolex watches, gucci outlet, christian louboutin

ninest123 said...

soccer shoes, bottega veneta, instyler, iphone 6s plus cases, converse, nfl jerseys, soccer jerseys, iphone 6s cases, mcm handbags, p90x, jimmy choo outlet, baseball bats, ghd, north face jackets, iphone 6 plus cases, iphone 6 cases, ipad cases, hollister clothing store, air max, babyliss pro, chi flat iron, iphone cases, beats by dre, valentino shoes, timberland boots, mac cosmetics, vans shoes, celine handbags, insanity workout, asics running shoes, ferragamo shoes, wedding dresses, north face outlet, abercrombie and fitch, oakley, ralph lauren, air max, mont blanc, lululemon outlet, reebok outlet, abercrombie, s6 case, gucci, herve leger, ray ban, birkin bag, new balance shoes, iphone 5s cases, vans, nike roshe run, louboutin, giuseppe zanotti

ninest123 said...

hollister, ugg, canada goose, moncler, pandora jewelry, rolex watches, montre homme, moncler, sac lancel, thomas sabo, moncler, swarovski crystal, sac louis vuitton, ugg, louis vuitton, links of london, barbour, moncler, juicy couture outlet, moncler outlet, canada goose, ugg pas cher, converse shoes, pandora jewelry, louis vuitton, doke gabbana, swarovski, coach outlet store online, pandora charms, canada goose, moncler, canada goose, juicy couture, pandora charms, supra shoes, moncler, canada goose uk, canada goose, ugg, marc jacobs, moncler, ugg boots, canada goose outlet, sac louis vuitton, canada goose jackets, barbour, wedding dresses, karen millen, toms shoes, louis vuitton uk
ninest123 16.01

龙大猫 said...

new england patriots jersey
longchamps
falcons jersey
louboutin shoes uk
lacoste online shop
nike mercurial
yeezy boost 350
kobe sneakers
air jordan shoes
adidas superstar

Post a Comment

Please leave me a comment. I would like to hear from you.
Thank you.